Kiosk Printer

Back to Category

RD-ITK38

   

Specifications

Printing Method
  • Raster, direct thermal.
  • The printed image is created using WindowsTM WYSIWYG Printer Driver (PAsupplied printer driver required.)
    		•
    Print Speed 2.00 IPS Max.
    Print Width 8". (203 mm) Max
    Printhead Dot Density 300 DPI (11.81 dots/mm) Dot Size 3.33 x 10-3 in. (0.0847 mm)
    Paper
  • DWidth: 8.5" to 6.5"
  • Standard Width: 8.5" +0/-0.040"(216 mm +0/-1 mm)
  • A4: 8.3" (210mm)
  • Other Widths: <8.5" special factory order
  • Caliper: 0.003" (+0.0007" / -0.0008")
  • Feed: Friction driver roller
    		•
    Document Length 3.25" Min. User defined Max
    Detectors
  • Paper/Registration (Optical)
  • Printhead Temperature (Thermistor)
  • Printhead Lever Detect (Mech. Switch)
  • Paper Jam Detection (Optical)
  • Document Not Taken (Optical)
  • (T-P Only)
    • User Switches
  • Power On/Off
  • Select (F0)
  • Test (F1)
  • Line Feed (F2)
  • Form Feed (F3)
    		•

    Specifications

    Indicators
  • Power/Paper (LED)
  • Ready (LED)
  • Attention/Error (LED)
  • Sequential Tones (Beeper)
    		•
    System Parameters A user friendly switch panel entry of setup data into EEPROM memory.(Print intensity, control settings, etc.)
    Printer Status Data
  • Includes all printer operational parameters: Low Paper, Out of paper, Jam, Ticket Not Taken, unique 64-Bit electronic serial number, etc.)
  • Status is returned to host via the interface's reverse channel.
  • Status information is critically important for unattended printer deployments
    		•
    Life
  • Printhead: 30.0 x 106 pulses/dot (Min.) 65.6 x 103 ft (20 Km) abrasive (Min.)
  • Cutter: 500 K (Typical), 300K (Min.)
  • Transport-Presenter: 450 K ft. (Typical); 270 K ft. (Min.) of delivered paper.
    		•
    System Requirements WindowsTM compatible 300 MHz or faster PC with Pentium CPU and ECP port with DMA (recommended)
    Printer Drivers
  • Windows 98
  • Windows ME
  • Windows NT 4.0
  • Windows 2000
  • Windows XP
    		•

    Interface

    Parallel IEEE-1284 Parallel Module using Compatibility Mode forward and Nibble Mode reverse channels
    Interface Cable Standard IEEE-1284 A-B cable (DB25M/C36M)
    USB Serial
  • Interface Module (2nd Qtr 03)
  • USB Interface Cable: Standard USB A-B Cable (1.1 or 2.0 compliant)
    		•
    USB Interface/Cable
  • USB Interface/Cable: USB via an add-on USB to IEEE-1284 adapter cable to convert printer's parallel interface to a USB.
  • No additional USB cable required. (Windows 2000 or XP only)
    		•
    Options
  • Motor Driven Cutter
  • Tearbar disposing/Non-Disposing Transport- Presenter
  • Detachable Internal or External Paper Roll Holders
  • Low paper detection sensing
    		•

    Environment

    Temperature: Operating +5oC to +4OoC
    Storage -5oC to +65oC
    Humidity 20-85% relative, non-condensing

    Regulatory Compliance

    CE Mark Compliant
    Safety UL 1950, 3rd Edition
    CAN/CSA C22.2 No. 950-00
    CENELEC EN 60950 1992
    EMI/EMC FCC Part 15 Class A
    EN 55024 1998
    EN 55022 1998 Class A
    CB Test Certificate Compliant IEC 60950 2nd Edition

    Power

    Power +24 VDC (±5%)
    Power Provided By Model PS-60-14: 60 w or Model PS-130-14: 130 w

    Power Supply Options

    AC Input Voltage 85-264 VAC (60 w) 85-132 or 170-264 VAC (130 w)
    Input Frequency 47 to 63 Hz
    AC Input Curren
  • 1.5 A (rms) @ 115 VAC (60 w)
  • 0.9 A (rms) @ 230 VAC (60 w)
  • 3.0A (rms) @ 115 VAC (130 w)
  • 1.7 A (rms) @ 230 VAC (130 w)
    		•
    DC Power 60 or 130 Watts (average)

    Weight

    Printer 8.3 lbs
    Power Supply .2 lbs. (60 Watt Model), 1.9 lbs. (130 Watt Model)